We had one of the first cool days of Fall yesterday, cool enough to justify real shoes — with socks!  It probably won’t last, but we’ve been pining for cooler weather and the darker, heavier beers that go with them.  Beers that could plausibly go with shepherd’s pie.  So we took advantage of the nice weather and spent the whole day inside slaving over a hot stove, brewing a batch of abbey ale, using a recipe based on Westmalle Dubbel.

We had (almost) all of our equipment ready, and took the plunge and did our first all-grain batch.  This was also our first liquid yeast, and between those two things, it went about as well as could be expected:

• Apparently, liquid yeast needs to come out of the fridge 3-6 hours before you can pitch it.  Luckily, I remembered to check just in time.
• 5 gallons of sparge water took a long time to bring up to temp — roughly an hour.  And I thought I was being clever when I remembered to start heating it 20 minutes before the mash was supposed to be done…
• It took roughly 8½ hours from starting to heat the water for the mash, to getting the fermenter tucked away in the pantry.  Mashing, collecting wort and the boil combined took 4½ hours, so the other 4 hours was spent waiting for water to heat up (or cool down), filtering wort into the fermenter, etc.
• Our fancy new kitchen faucets don’t have a standard tap that the wort chiller can screw into.  So I ran a garden hose into the kitchen and hooked it up.  Of course, the hose had a leak and sprayed water everywhere.  Even with copious duct-taping, it still leaked a trickle.  Eventually, I had the hose angled down into a dish pan, collecting the runoff.  But that took a surprisingly long time to get right.

Unlike some previous batches, I actually remembered to take gravity readings at several points.  With the help of a handy little tool for temperature-correcting gravity readings, we got exactly the gravity called for in the recipe.  So we’ve got high hopes.